Product Availability

Find out about this in our where to buy section.

Is blink Products Genuine?

We are distributing 100% genuine products and the only authorised distributor for all the brands we represent in sri lanka .

How to cross check this?

Return & Exchange Policy

Please note that watches once bought cannot be returned nor exchanged. Unless deemed defective by us or from shipment. Defective watches will replaced subject to the warranty policy.

Warranty Policy

What is the Warranty duration?

Blink International Private Limited provides free warranty services against manufacturing defects for all Blink products. The warranty period is mentioned on the warranty cards for respective products.

What are the Warranty conditions?

Blink products which are under Warranty and having manufacturing defects shall be repaired “FREE OF COST”. Customer shall show original Warranty card and copy of purchase-bill for availing warranty service.
The Warranty is valid only in country of purchase .

Product having following problems shall be treated as out of warranty :

  • Physical damage to Liquid Crystal Display.
  • Scratches on the body of the product.
  • Physical damage to plastic parts.
  • Mishandling of product.
  • Battery leakage.
  • Used bands of watches.
  • Water seepage.
  • Broken bands of watches.
  • Missing parts.
  • Fading of printing.
  • Wear and tear of switches.
  • Discolouration of product parts including cases, bands/straps

handling of a watch

Are there any precautions to keep in mind when handling water resistant watch?

The following applies to watches with WATER RESIST or WATER RESISTANT marked on the back cover.

“WATER RESIST” or “WATER RESISTANT” models

• Do not use your watch for scuba diving or other types of diving that requires air tanks.
• Watches that do not have WATER RESIST or WATER RESISTANT marked on the back cover are not protected against the effects of sweat. Avoid using such a watch under conditions where it will be exposed to large amounts of sweat or moisture, or to direct splashing with water.
• Even if a watch is water resistant, note the usage precautions described below. Such types of use reduce water resistance performance and can cause fogging of the glass.
– Do not operate the crown or buttons while your watch is submersed in water or wet.
– Avoid wearing your watch while in the bath.
– Do not wear your watch while in a heated swimming pool, sauna, or any other high temperature/high humidity environment.
– Do not wear your watch while washing your hands or face, while doing housework, or while performing any other task that involves soaps or detergents.
• After submersion in seawater, use plain water to rinse all salt and dirt from your watch.
• To maintain water resistance, have the gaskets of your watch replaced periodically (about once every two or three years).
• A trained technician will inspect your watch for proper water resistance whenever you have its battery replaced. Battery replacement requires the use of special tools. Always request battery replacement from your original retailer or from an authorized CASIO service center.
• Some water-resistant watches come with fashionable leather bands. Avoid swimming, washing, or any other activity that causes direct exposure of a leather band to water.
• Your water-resistant watch has been tested in accordance with International Organization for Standardization regulations.

“AIR DIVER’S 200M” or “DIVER’S WATCH 200M” models

• A diver’s watch is designed to withstand pressure up to 200 meters. Do not wear this watch at depths greater than the depth marked on it. It can be worn while skin diving, scuba diving, etc. Do not use a diver’s watch for deep diving (diving with a gas mixture) or at a depth greater than that indicated.
• The buttons of your watch can be operated while submerged. Do not operate the crown while the watch is submerged.
• After submersion in seawater, use plain water to rinse all salt and dirt from your watch.
• To maintain water resistance, be sure to have the gaskets of your watch replaced regularly (once every two years).
• A trained technician will inspect your watch for proper water resistance whenever you have its battery replaced. Battery replacement requires the use of special tools. Always request battery replacement from your original retailer or from an authorized CASIO service center.
• Your diver’s watch has been tested in accordance with International Organization for Standardization regulations.

What do I need to do for regular user maintenance?

Remember that you wear your watch next to your skin, just like a piece of clothing. To ensure your watch performs at the level for which it is designed, keep it clean by frequently wiping with a soft cloth to keep your watch and band free of dirt, sweat, water and other foreign matter.

• Whenever your watch is exposed to sea water or mud, rinse it off with clean fresh water.

• For a metal band or a resin band with metal parts, use a soft toothbrush or similar tool to scrub the band with a weak solution of water and a mild neutral detergent, or with soapy water. Next, rinse with water to remove all remaining detergent and then wipe dry with a soft absorbent cloth. When washing the band, wrap the watch case with kitchen plastic wrap so it does not come into contact with the detergent or soap.

• For a resin band, wash with water and then wipe dry with a soft cloth. Note that sometimes a smudge like pattern may appear on the surface of a resin band. This will not have any effect on your skin or clothing. Wipe with a cloth to remove the smudge pattern.

• Clean water and sweat from a leather band by wiping with a soft cloth.

• Not operating a watch crown, buttons, or rotary bezel could lead to later problems with their operation. Periodically rotate the crown and rotary bezel, and press buttons to maintain proper operation.

What should I do if the inside of the glass becomes fogged?

The inside surface of the watch glass may fog when the watch is exposed to a sudden drop in temperature. No problem is indicated if the fogging clears up relatively quickly. Sudden and extreme temperature changes (such as coming into an air conditioned room in the summer and standing close to an air conditioner outlet, or leaving a heated room in the winter and allowing your watch to come into contact with snow) can cause it to take longer for glass fogging to clear up. If glass fogging does not clear up or if you notice moisture inside of the glass, immediately stop using your watch and take it to your original retailer or to an authorized CASIO service center.

How can I adjust the size of a metal band?

Special tools are required to change the number of band segments,so you should not try to do it yourself. In order to prevent damage to band components, possible personal injury, and other problems, take your watch to the place where you purchased it to have the band size adjusted.

How does the band attach to the watch? (About handling of a watch)

・Tightening the band too tightly can cause you to sweat and make it difficult for air to pass under the band, which can lead to skin irritation. Do not fasten the band too tightly. There should be enough room between the band and your wrist so you can insert your finger.

・Deterioration, rust, and other conditions can cause the band to break or come off of your watch, which in turn can cause band pins to fly out of position or to fall out. This creates the risk of your watch falling from your wrist and becoming lost, and also creates the risk of personal injury. Always take good care of your band and keep it clean.

・Immediately stop using a band if you even notice any of the following: loss of band flexibility, band cracks, band discoloration, band looseness, band connecting pin flying or falling out, or any other abnormality. Take your watch to your original retailer or to a CASIO service center for inspection and repair (for which you will be charged) or to have the band replaced (for which you will be charged).

Are there any precautions to keep in mind when handling resin components?

• Allowing your watch to remain in contact with other items or storing it together with other items for long periods while it is wet can cause color on resin components to transfer to the other items, or the color of the other items to transfer to the resin components of your watch. Be sure to dry off your watch thoroughly before storing it and make sure it is not in contact with other items.

• Leaving your watch where it is exposed to direct sunlight (ultraviolet rays) for long periods or failure to clean dirt from your watch for long periods can cause it to become discolored.

• Friction caused by certain conditions (strong external force, sustained rubbing,impact, etc.) can cause discoloration of painted components.

• If there are printed figures on the band, strong rubbing of the printed area can cause discoloration.

• Leaving your watch wet for long periods can cause fluorescent color to fade. Wipe the watch dry as soon as possible after it becomes wet.

• Semi-transparent resin parts can become discolored due to sweat and dirt, and if exposed to high temperatures and humidity for long periods.

• Daily use and long-term storage of your watch can lead to deterioration, breaking, or bending of resin components. The extent of such damage depends on usage conditions and storage conditions.

Is there any way to take the watch apart?

Never try to take the watch apart. Doing so creates the risk of personal injury and malfunction of the watch.

Are there any precautions when storing the watch for long periods?

If you do not plan to use your watch for a long time, thoroughly wipe it free of all dirt, sweat, and moisture, and store it in a cool, dry place.

Are there any precautions to keep in mind concerning chemicals? (About handling of a watch)

Do not allow your watch to come into contact with thinner, gasoline, solvents, oils, or fats, or with any cleaners, adhesives, paints, medicines, or cosmetics that contain such ingredients. Doing so can cause discoloration of or damage to the resin case, resin band, leather, and other parts.

Are there any precautions to keep in mind when handling metal components? (About handling of a watch)

・Failure to clean dirt from metal components can lead to formation of rust, even if components are stainless steel or plated. If metal components exposed to sweat or water, wipe thoroughly with a soft, absorbent cloth and then place the watch in a well-ventilated location to dry.

・Use a soft toothbrush or similar tool to scrub the metal with a weak solution of water and a mild neutral detergent, or with soapy water. Next, rinse with water to remove all remaining detergent and then wipe dry with a soft absorbent cloth. When washing metal components, wrap the watch case with kitchen plastic wrap so it does not come into contact with the detergent or soap.

Are there any precautions to keep in mind when handling leather band?

• Allowing your watch to remain in contact with other items or storing it together with other items for long periods while it is wet can cause the color of the leather band to transfer to the other items or the color of the other items to transfer to the leather band. Be sure to dry off your watch thoroughly with a soft cloth before storing it and make sure it is not in contact with other items.

• Leaving a leather band where it is exposed to direct sunlight (ultraviolet rays) for long periods or failure to clean dirt from a leather band for long periods can cause it to become discolored.

CAUTION: Exposing a leather band to rubbing or dirt can cause color transfer and discoloration.